My textile adventure: Part One: Project 1

Sunday 29th August - making marks continued!...............using a broader range of materials.

It took me ages to find all the materials needed for this exercise. Hopefully, once found - never lost again. It does prevent you from starting something when you want to......maybe that's where i've been going wrong?

I am going to stick to cartridge and watercolour paper for tonight, I'll leave tomorrow free to find my collection of papers.

Pencil crayon / Cartridge paper: Flicked lines

Cartridge paper 120gsm, pencil crayon

The pencil crayon shows up well on this surface, the tone gets darkers where the lines cross. A slight grain in the paper gives texture to the lines.

Pencil crayon / cartridge paper: dark to light tone.

Cartridge paper 120gsm, pencil crayon

Layers of pencil crayon were added to the paper surface. Dark tone achieved by using heavier layers, light tone achieved by lighter pressure on the pencil - blending with a finger afterwards.

Pencil crayon / cartridge paper: flowing lines.

Cartridge paper 120gsm, pencil crayon

The pencil was able to move smoothly and freely across the surface of the cartridge paper.

Pencil crayon / cartridge paper: blending colours.

Cartridge paper 120gsm, pencil crayon.

The pencil crayon worked well - using yellow over blue, made green. Colours were blended and mixed with some ease on this surface.

Ink / watercolour paper: Ink applied with a stick.

Watercolour paper 200gsm, Ink.

The watercolour paper was very robust to use. Using a stick created nice uneven lines, and you could press quite hard onto the paper surface.

Acrylic paint / smooth cartridge paper: Undiluted acrylic paint brushed onto cartridge paper.

Smooth cartridge paper 130gsm, acrylic paint

The paint was applied to this smooth surface in layers of colour, and brushed into, until the paint dried. Creating an interesting texture to the paint - very 'scratchy'.

Acrylic paint / smooth cartridge paper: Dilute acrylic paint dripped onto paper and scratched into.

Smooth cartridge paper 130gsm, acrylic paint

Wet paint (red) was dropped on top of wet paint (yellow), then the colours were scratched into with a stick. The colours pulled through each other creating some colour mixing and texture.

Acrylic paint / smooth cartridge paper: Very dilute acrylic paint was applied to smooth cartridge paper and scratched into.

Smooth cartridge paper 130gsm, acrylic paint

The paint was very watery so blended well. While the surface was still wet, scratching into the surface produced some nice lines. The paper was heavy enough that it didn't buckle.

Acrylic paint / smooth cartridge paper: A thick layer of undiluted acrylic paint was added to smooth cartridge paper and drawn into.

Smooth cartridge paper 130gsm, acrylic paint

While the paint was still wet, a stick was used to draw into the surface. This produced a nice textural effect.

Acrylic paint / smooth cartridge paper: Undilute paint applied with a stick.

Smooth cartridge paper130gsm, acrylic paint

I used thick paint and applied it to the surface with a stick. I thought this would produce strong bold marks - but it made a delicate broken line. I like the effect though.

Fine stick of charcoal / cartridge paper: from dark to light tones.

Cartridge paper 120gsm, charcoal

Charcoal was applied to the paper and blended with a finger. It produced a lovely soft, smudgy effect and also created a nice range of tones.

Medium stick of charcoal / cartridge paper: The charcoal was flicked onto the paper surface.

Cartridge paper, charcoal.

This produced nice spiky lines. The grain of the paper shows through and the lines go from dark to lighter black.

Chunky charcoal / cartridge paper: Charcoal aplied heavily to the surface.

Cartridge paper 120gsm, charcoal.

This very black charcoal was scribbled onto the surface of the paper - will probably work well with 'rubbing out' techniques. It covers the paper well.

Thick stick of charcoal / watercolour paper: Charcoal drawn on paper surface and blended in.

Watercolour paper 200gsm, charcoal

This produced nice, smooth lines - but some texture manages to show through. The thicker stick of charcoal produced the lightest black line.

Broad tipped felt pen / cartridge paper: Dots were applied to the surface.

Cartridge paper 120gsm, felt pen

Nice technique - should probably be kept for filling in small areas, but it produced a nice tonal range, from dark to light. Felt pen was easy to apply to the surface.

Watercolour paint, smooth cartridge paper: Dilute watercolour paint was sprayed onto the surface, by pulling a thumb across the bristles of a brush.

Smooth cartridge paper 130gsm, watercolour paint

I really like the effect of this technique. The colour can be built up by repeated sprayings. It could also be used with both masks and stencils.

Gouache / smooth cartridge paper: Wet-on-wet technique.

Smooth cartridge paper 130gsm, gouache paint

This produced a feathery effect. It didn't spread as much as dilute watercolour paint.

Soft pastel / cartridge paper: Lines drawn onto the paper surface.

Cartridge paper 120gsm, soft pastel

The pastel is much blacker in colour than the charcoal. The pastel grips to the surface and produces a nice tonal effect where the lines cross.

Broad stick of charcoal / cartridge paper: Curvy lines drawn on the paper surface.

Cartridge paper 120gsm, charcoal.

This didn't produce as many tonal changes. Again the large stick of charcoal creates a soft black line.

Soft pastel / cartridge paper: Scribbling and blending soft pastel.

Cartridge paper, soft pastel

The texture of the drawing still showed through even after the pastel was blended. The tonal changes were good.

Soft pastel / cartridge paper: blending and colour mixing soft pastel.

Cartridge paper 120gsm, soft pastel

The colours mixed and blended well on the paper. The changes of colour were smooth and gradual.

Soft pastel / smooth cartridge paper: Soft pastel was applied over wet paper.

Smooth cartridge paper 130gsm, soft pastel

This works nicely even on wet paper. The pastel moves very smoothly across the wet surface. The colours produced are darker than when using dry paper.

Watercolour paint / smooth cartridge paper: Dilute watercolour paint applied to dry cartridge paper.

Smooth cartridge paper 130gsm, watercolour paint.

Applying the dilute watercolour paint quickly with a thin brush produced a nice cross-hatching effect. The layers of colour and tone built up well.

Watercolour paint / smooth cartridge paper: The watercolour paint was applied with a natural sponge.

Smooth cartridge paper 130gsm, watercolour paint

This produces a soft, delicate effect. The colours blend and change gradually.

Watercolour paint / smooth cartridge paper: Using a graduated wash on dry paper.

Smooth cartridge paper, watercolour paint

The paint bleeds into the next layer when the paint is wet. As the paint starts to dry on the brush, nice areas of paper start to show through.

Felt pen / cartridge paper: Using a wax resist.

Cartridge paper 120gsm, felt pen

I applied the wax resist and drew with the felt pen over te top of it. I thought this would work better - the felt pen had to be wiped off the surface of the wax.

Felt pen / cartridge paper: drawing with a broad tipped felt pen over the paper surface.

Cartridge paper 120gsm, felt pen

The pen covered the area quickly and well. Some colour blending was achievable with the red and yellow.
Interesting lines appeared where the lines crossed over each other.

Felt pen / cartridge paper: Using a fine tipped felt pen over the surface of the paper.

Cartridge paper 120gsm, felt pen

This produced fine marks with equal depth of tone and colour.
Good for spiky lines and cross-hatching. Good optical effect where the lines of colour overlap each other.
Probably not good to use for covering large areas.

-------------------------------------------

A nice messy experimenting session. Again, an excuse to see how far you can push your media, what does it do.

I used a range of media - felt tips, wax crayons, pencil crayons, charcoal, soft pastel, watercolour and acrylic in as many different ways as I could think of.
From blending to splattering to scratching through.
I also used a range of mark-making equipment - sticks, paint brushes, fingers, sponges to achieve these techniques.

I enjoyed the session, once I had gathered everything together!
Although it was a messy session, the use of a stencil helped to control some of the results.
I now have some idea of which technique, and which media could be used to represent some of the words that we were given to express.

At the moment, sponging and splattering appear to give the most delicate and soft results, whilst thick, undiluted acrylics applied with a brush, and the scratched through watercolours, appear to give the most dramatic results.

Conclusion for today - putting your materials in an accessible place means you can start any project when you feel like it!!

Some of the final pages of these experiments: